A Step by Step Guide on How to remove iPhone Screen Protector

A Step by Step Guide on How to remove iPhone Screen Protector

Your phone’s screen protective layer is only going to last for a couple of days. If your screen protectors get cracks or scratches, it is not long before you will find yourself heading to the mobile shop and have it replaced. Even a minor crack or scratch is bad since it will definitely increase and possibly put your actual phone screen at risk. 

A Step by Step Guide on How to remove iPhone Screen

Moreover, if you carry expensive phones like an iPhone, you certainly do not want to take a risk by not replacing it. Many people tend to be cautious about removing a cracked or scratched phone protector on their own. Still, it is not that difficult as it seems. If you do not know how to remove an iPhone screen protector, this is just the right place to solve your queries.

How to remove your damaged iPhone Screen Protector

Although you can have your screen protector replaced from a mobile phone shop, some choose to replace it independently. Removing a screen protector is something that can quickly be done at home. You must keep in mind a few steps before trying to remove your iPhone screen protector on your own. They are as follows:

Step 1: Gathering essential tools.

Like all other kinds of projects, you need to gather the right set of tools before removing an iPhone screen protector. Assembling the necessary equipment for this task beforehand will make it easier to remove your screen protector smoothly. The best thing is that all the essential tools needed to remove a screen protector might readily be available and found in your homes. The items you will be needing are:

  • A credit/debit card or any type of business card.
  • Toothpicks
  • A hairdryer (optional)
  • Alcohol wipes
  • Microfiber cloth (optional)

Step 2: Start lifting from one corner.

Now to start, begin with the top right area of your iPhone and carefully use a toothpick or your fingernail to gently lift off the protective glass layer away from your phone’s screen. Make sure to lift the glass away from the phone screen with just enough space for a credit card to slide underneath. 

If you think it is challenging to get a toothpick beneath the screen protector, you can use a hairdryer as well. With this hair dryer, first heat up the screen’s surface as the adhesive under it will lose its sticking power. It requires just a little amount of heat, not more than 15 seconds, so be careful not to apply too much. 

Step 3: Loosen the phone edges

After one corner of the screen protector has been lifted, take a business or credit card and carefully insert it underneath the protective glass, almost about 0.5 inches towards the iPhone’s center. Then, slide the card within your phone’s perimeter till you go back to the point where you started. You can repeat this step again for the adequate measure.

When you come across a corner that easily budges, it is advised to be patient. Instead of falling into temptation in yanking off the entire screen protector, it is better to obtain a slow pace. It is essential to loosen the corner and peel it while going with the flow. 

This step is incredibly important, particularly when your iPhone screen protector is badly shattered. You certainly do not want to have tiny shards of glasses falling everywhere. The best way to remove a screen protector is to slowly pull away till the screen protector evidently detaches from the phone. 

Step 4: Remove it slowly

While the credit card is still inserted, stop your iPhone, you can glide it underneath the protector, covering all the corners of your phone. Gently slide it downwards while lifting the glass against the phone screen at the same time. A crucial thing in this step is to maintain patience and perform this task slowly. You should not apply excessive pressure on the glass, as it might crack or bend and ultimately ruin your screen.

Step 5: Final touches

By now, the screen protector must have successfully been lifted off of your phone. Once the screen protector has been removed, place it aside. Take an alcohol wipe along with a microfiber cloth to wipe your screen. Once it has dried, you will have a spotless iPhone ready to be shielded with a brand new screen protector.

Using Duct tape to remove an iPhone Screen Protector

Another method to remove your iPhone screen protector is via duct tape. Cut out one piece of duct tape and gently wrap it around your fingers. The sticky side must be facing outwards. Then, press this duct tape in any one corner of the screen and start rolling away. The duct tape should stick to the protective layer so that it eventually comes off. This method is incredibly helpful if your screen protector is flexible and thin, in contrast to a tempered glass protector. 

Three Times when it is vital to replace your iPhone Screen Protector

  • It is badly cracked.

  • Unsurprisingly, one of the main reasons to replace your screen protector occurs due to a crack in your screen protector. Now this crack can be a single corner-to-corner split or a significant spider-web effect. Many people think that cracked screen protectors are of cheap quality. 

    However, you should realize that the screen protector absorbed the shock upon falling. Had it not been for the screen protector, your phone screen would have been heavily influenced by this shock. Using a damaged screen protector can be hazardous since a sharp crack can cut through your fingers. 

  • It has been scratched many times.

  • Just like screen protectors are created for absorbing shocks and cracks, it also does a twin job of working as a shield for routine use. Since scratches on your screen protector get natural and phone light both, it can instantly pile up the scratches to a quantity that makes viewing the screen awfully uncomfortable. 

    Sometimes, the scrapes on your phone can be so tiny that it is almost impossible to see. If your phone screen has started to appear blurry, and you have difficulty seeing anything because of infinite scratches, it is high-time you change your screen protector. 

  • It starts to peel.

  • Another reason for replacing your iPhone screen protector arises when its glue backing is not working any longer. This might cause the layer of glass to peel off from the corners. A phone protector that has started to peel off is useless because the screen protector is not in contact with your touch screen anymore. 

    It also means it will also not make contact with swipes, taps, and pinches. A good quality screen protector does not normally peel unless immersed in water or is not applied correctly. Tiny dust particles can also affect the sticking power and result in peeling or create bubbles under the protective layer. 

    A Step by Step Guide on How to remove iPhone Screen

    Leave a comment

    Please note, comments must be approved before they are published