Wondering how to lace Under Armour Pursuit 2 shoes the right way? You’re not alone! We’ve all been there, and let’s be real—it’s frustrating! The good news? The lacing method is super easy.
Here’s a quick answer: To lace Under Armour Pursuit 2, start with even lace lengths, crisscross through each eyelet for balance, and adjust the tension for comfort. Finish with a secure double-knot to keep them snug and supportive all day.
Ready to learn how to lace Under Armour Pursuit 2 like a pro? We’re here to guide you through every detail. From step-by-step instructions to avoiding common mistakes, you’ll find everything you need in this guide.
Key Points
-
Start by threading the laces evenly through the bottom holes to keep both sides equal.
-
Cross the laces over and thread them through the next set of holes above.
-
Keep crisscrossing the laces up the shoe until you reach the top.
-
Adjust the laces so they’re snug but not too tight—you want them comfy.
-
Lacing properly turns uncomfortable shoes into the perfect fit.
-
Use every eyelet—skipping them causes uneven support.
-
Test the fit after lacing to ensure it feels just right.
How to lace Under Armour Pursuit 2?
Lacing your Under Armour Pursuit 2 shoes isn’t just about keeping them on your feet—it’s about getting the perfect fit for comfort and performance. The right lacing technique can make all the difference in support and ease.
Let’s look at how to lace Under Armour Pursuit 2 shoes step by step.
Step 1: Start at the Bottom
When we begin lacing, the first step is to set the foundation. Start by threading the shoelace ends through the bottom eyelets near the toes. Insert the laces from the top, pulling them evenly to make sure both sides are equal in length.
This step might seem super simple, but trust us, getting the lengths even at this stage saves a ton of trouble later. Uneven laces can make one side tighter than the other, which feels annoying and throws off the balance. Double-check now so the rest of the lacing is smooth.
What we love about starting at the bottom is how it creates a firm anchor point. It’s like laying the groundwork for a strong, snug fit.
And hey, don’t rush this part. Take your time to align the laces neatly. Your feet will thank you when everything feels just right as you walk or run.
Step 2: Create the First Cross
Step two is crisscrossing. Take the left lace and cross it over to the right side. Thread it through the second eyelet from the bottom. Then, take the right lace and cross it over to the left side, threading it through its second eyelet.
In our opinion, this classic crisscross technique is a game-changer. It does two main things:
-
Gives a neat look
-
Distributes tension evenly across the top of your foot.
We love this method because it’s tried and true. It’s simple, reliable, and works for most people. Plus, it’s super easy to adjust if you need more or less tightness as you go.
Here’s a tip: keep the tension steady but don’t pull too hard at this stage. You want the laces snug but not cutting off circulation. You’ll get the hang of it as you repeat the process up the shoe.
Step 3: Continue the Pattern
Now comes the fun part—just keep repeating the crisscross pattern. Take each lace and alternate crossing them over into the next eyelets, moving upward toward the ankle. Keep the pattern going smoothly until you reach the top eyelets.
This step is like going on autopilot once you’ve nailed the rhythm. By now, your laces should start looking like a neat, uniform ladder across the shoe. It feels satisfying when the laces fall into place perfectly, doesn’t it?
What we find awesome here is the control you have. You can make each section tighter or looser, depending on how your foot feels. Got wide feet? Leave a bit of slack. Need extra support? Pull those laces snug. It’s all about customizing to your comfort.
And don’t forget, if your shoes have extra eyelets at the top, use them! Those are there for heel-lock lacing, which keeps your foot secure for intense workouts.
Step 4: Secure the Laces
Finally, we’re at the finish line: Once the laces reach the top eyelets, it’s time to secure them. Tie a solid bow or knot that won’t easily come undone. Double-knotting is a great idea if you’re worried about tripping on loose ends.
Remember that a secure tie keeps your shoe snug and prevents the laces from slipping during your activity. We like to test our laces at this point—wiggle your foot and take a few steps. Does everything feel good? Adjust if needed.
For those who prefer a cleaner look, tuck the extra lace into the sides of the shoe or under the tongue. It keeps things neat and avoids dangling ends.
That’s it!
Why Is Properly Lacing Your Under Armour Pursuit 2 So Important?
Lacing your Under Armour Pursuit 2 shoes might seem like a small thing, but it’s key to comfort and safety. Let’s break it all down:
Enhances Comfort
If your shoes don’t feel comfortable, everything else feels off. Proper lacing fixes that by giving your shoes the perfect fit. When you lace your shoes the right way, the pressure is spread evenly across your foot. This means no tight spots or slipping around inside. It feels balanced.
You can easily tweak the lacing to match your needs. If one part of your shoe feels too tight, loosen it. If it’s too loose, pull it tighter. It’s all about creating a fit that feels just right.
Provides Better Foot Support
According to J Foot Ankle Res. (2017), your feet need proper support, especially during exercise or long days. Good lacing helps your shoes support your feet exactly where they need it. When your shoes are laced correctly, they stay in place. This stability keeps your feet aligned, reducing strain on your arches and ankles.
As discussed above, proper lacing also keeps your feet from sliding inside the shoes. This reduces unnecessary stress on your joints and muscles.
Prevents Injuries
Bad lacing can cause injuries you didn’t even realize were connected to your shoes. Loose laces lead to blisters, while tight ones can restrict circulation. Neither is good.
When your shoes are laced properly, your foot stays secure. This means no sliding around or rubbing that causes painful blisters. It also means you won’t trip over loose laces—a simple but common safety issue.
Optimizes Performance
The way you lace your shoes affects how well you move. With proper lacing, your shoes fit snugly and move with your feet (instead of against them). This means better strides, smoother movements, and less wasted energy.
Under Armour Pursuit 2 shoes are designed for performance, but they can only do their job if they’re laced properly.
Reduces Wear and Tear on the Shoe
Improper lacing doesn’t just affect your feet; it can damage your shoes. Loose laces cause unnecessary movement that stretches and wears out the material over time. In comparison, when your laces are tight and even, your shoes hold their shape better.
Ensures Heel Security
Nothing is more frustrating than your heel slipping out of your shoe. Proper lacing fixes this by locking your heel in place. When your heel is secure, you don’t have to keep adjusting your shoe. It’s especially important for running or quick movements.
That’s not it. With a secure heel, your shoes feel more reliable. You’ll move with confidence, knowing they’re supporting you the way they should.
Improves Aesthetic Appeal
Let’s not forget how good properly laced shoes look. Neat, even laces make your Under Armour Pursuit 2 look polished and put-together.
Note that bunched-up or uneven laces can make your shoes look sloppy. On the other hand, clean lacing shows you care about the details.
And remember - When your shoes look good, you feel good.
Common Mistakes When Lacing Under Armour Pursuit 2
Lacing your Under Armour Pursuit 2 may seem simple, but small mistakes can mess with your comfort, support, and shoe performance. Let’s look at the most common mistakes people do:
Starting with Uneven Lace Lengths
Starting with uneven lace lengths throws off everything. When one side is longer, you’ll end up with uneven tension across the shoe, which feels uncomfortable.
The problem often begins when you first thread the laces through the bottom eyelets. If you don’t pull them evenly, one side ends up too short or too long. This makes it hard to adjust the laces as you move upward.
Uneven laces can also make it difficult to tie a proper bow. You might have a tiny loop on one side and an extra-long one on the other.
Over-Tightening the Laces
Pulling your laces too tight is a common mistake. It might seem like tighter is better for support, but it can actually cut off circulation and make your feet go numb.
That’s not it. Over-tightened laces also create pressure points on the top of your foot. This can cause discomfort and even pain, especially if you’re wearing your shoes for long periods.
Another issue with over-tightening is that it strains the shoe’s material. Constant pulling can weaken the eyelets or stretch the upper fabric, which shortens the lifespan of your shoes.
Lacing Too Loosely
Loose laces might feel more comfortable at first, but they can lead to bigger problems. Shoes that aren’t secure let your foot slide around, which causes blisters and instability.
When your laces are too loose, the shoe doesn’t support your foot properly. This increases the risk of injury, especially during physical activities like running.
Loose laces also make your shoes wear out faster. The extra movement puts stress on the seams and fabric, causing them to stretch or tear.
Skipping Eyelets
Here’s the deal: Every eyelet has a purpose, and skipping one creates uneven pressure across your foot. For example, if you skip an eyelet near the ankle, your heel might slip out of place. If you skip one near the toes, the front of the shoe won’t fit snugly. Both situations can cause discomfort and reduce your stability.
Another issue with skipping eyelets is that it weakens the structure of the shoe. The laces pull unevenly, putting extra stress on certain areas. Over time, this can damage the shoe.
Instead, take the time to lace through each eyelet. If you need to adjust the tension, do it gradually across all sections (rather than skipping steps).
Uneven Lacing Tension
Keep in mind that if one side of your laces is tighter than the other, your shoe won’t feel balanced. What will happen then? Well, this imbalance can cause hotspots where the laces press harder on your foot. Over time, this leads to irritation and discomfort, especially during long walks or runs.
To fix this, tighten the laces gradually and evenly as you move up the shoe.
Using Worn or Incorrect Shoelaces
Old or worn-out laces are a common issue. They lose their elasticity, fray, or break easily, which makes it hard to get a secure fit.
Using the wrong type of lace is another mistake. Thick laces may not fit through the eyelets properly, while thin ones might not provide enough hold.
On top of that, worn or mismatched laces can also make your shoes look sloppy. Even if the rest of your shoe is in great condition, bad laces can ruin the overall look and function.
Failing to Double-Knot the Bow
A loose bow is one of the easiest mistakes to avoid, but it’s still common. Double-knotting takes just a few extra seconds, so don’t skip it. It ensures your bow stays in place, no matter how active you are.
But what if you don’t like the look of a double knot? In this case, just tuck the loops into the sides of your shoes for a cleaner appearance.
Failing to Test the Fit After Lacing
The final mistake is skipping the fit test. Even if your laces look neat, they might not feel right. Therefore, always take a moment to walk around after lacing your shoes. Check for tight spots, loose areas, or any discomfort.
Testing the fit is especially important for new shoes or before a workout. Your feet might swell during the day, so what feels good in the morning might need tweaking later.
How Often Should You Replace Under armour pursuit 2 Laces?
Replacing your under armour pursuit 2 laces isn’t something we think about often, but it’s important. On average, you should replace them every 3–6 months if you wear your shoes daily.
Shoelaces go through a lot of stress. They’re constantly pulled, tied, and untied, which weakens the fibers over time. Fraying, stretching, or thinning are signs it’s time for new laces.
The type of activity matters, too. If you’re using your Under Armour Pursuit 2 for running or intense workouts, the laces might wear out faster. Keeping an eye on them ensures your shoes always perform their best.
That’s all.
If you love wearing Under Armour shores, it's crucial for you to know whether you can play games like basketball wearing them. To find out the details, read this guide - Are Under Armour 2 shoes a good choice to play basketball?
Conclusion
Lacing your Under Armour Pursuit 2 shoes doesn’t have to be complicated. Here’s a recap of what we covered:
-
Start with even lace lengths for a perfect fit.
-
Avoid overtightening or leaving your laces too loose.
-
Use each eyelet for even support and avoid skipping them.
-
Replace worn laces to keep your shoes looking and feeling great.
Take the time to lace them correctly—you’ll love the results!
