TIPS FOR HOW TO PREVENT ACRYLIC PAINT FROM CRACKING ON SHOES

TIPS FOR HOW TO PREVENT ACRYLIC PAINT FROM CRACKING ON SHOES

As an artist, you need different designs to be on your shoes as a sign of style and creativity. The most creative designs are made with the right paint. The question is deciding on the best paint to apply to your shoes. This article recommends the use of acrylic paint, the most suitable paint for any pair of shoes, especially if you are an artist. However, the problem becomes preventing this paint from cracking from your footwear. In this article, we are going to answer this question by discussing the most appropriate tips for preventing the acrylic paint from cracking on your shoes.

Preventing Acrylic Paint from Cracking Off Your Shoes

The following procedure will help you prevent acrylic paint from cracking on your shoes:

  • You have to apply acrylic paint in layers that are thin enough. You need not rush with this process. Furthermore, applying thick layers of the paint is likely to result in the cracking of the paint on the shoes. To achieve this, use your brush to apply one stroke of the paint and leave it to dry before adding another layer. Acrylic paint is preferred because it takes a short time to dry. 
  • The application has to be done in the direction of the shoe flexing. Try and apply the paint where the shoe flexes more. You can bend your sneakers to identify the areas with lines, such as the toe box. In such areas, the strokes should be run across, rather than straight. 
  • Do not use a mixture of paint brands. This is because several artists admit that mixing more than one paint brand makes the paint easily crack on their shoes.
  • Do not dry the paint using heat. It is not recommended to place the shoes in the sun to dry or using a hairdryer. To avoid the paint from cracking, you need to place them in an area with a good flow of air and temperature.
  • It is recommended to use acrylic paint sealant. The sealing process should be done in bursts, rather than dragging. Though time-consuming, you need to identify the area that needs sealing and apply the acrylic paint sealing in bursts and move to another area. After the sealant is dry, you need to apply a suitable waterproofing spray. This should be done in a gentle coating, before letting your shoes to dry completely for about 24 hours.

Painting Running Shoes

Running shoes like sneakers come at a friendly cost and are easier to maintain. When you need to paint them, you will need the following:

  • A damp piece of cloth
  • Any fine-grit sandpaper
  • A fine-bristled and wide-bristled brush
  • A suitable acrylic paint
  • Newspapers
  • A sealing spray of acrylic paint

After having all the above, you can paint your running shoes in the following steps:

  • Using the damp piece of cloth, wipe off the dust from the surface of your shoes and leave them to dry.
  • If you are working on leather running shoes, gently sand the area that needs to be painted using sandpaper to enable the paint to adhere to it.
  • If you are a beginner in paint application, you can start off the process with lighter colors before proceeding to darker tones. Still, you can use the fine-bristled and wide-bristled brushes to apply the backdrops. 
  • When finished with the painting, you can place your shoes outside on a newspaper. After they are dry, use the sealing procedure in this article to apply the acrylic paint sealant following your chosen design. 
  • The shoes should be left to dry for about 24 hours before they are ready to be worn.

How to Paint Toms Shoes

If you want to paint your Toms, Converse, or Vans shoes, you may go by the steps discussed above, with the only exception of the sandpaper. However, you can start off by making an outline of your shoe in case you need specific designs. Using a pencil, sketch the design on the surface of your shoe. Next, you can apply the paint on the shoe following the guide, using fine-bristled brushes for outlining and detailing. For the filling and the background, it is recommended you use the wide-bristled brush. You have to apply the colors in thin layers and letting the paint dry before reapplying.

The process has to be repeated before your desired results are achieved. Always remember to follow your guide in applying the paint. When the outcome is satisfying, you can then apply the sealant spray by gently coating it on the surface of the shoes. After the spray is completely dry, apply the waterproofing spray and allow the shoes to dry for 24 hours.

Painting Leather Shoes

Painting your leather shoes is one of the best ways of giving the look and care they deserve. However, you need to bear in mind that your shoes may not regain their original look after painting. The painting process will require you to have the following: 

  • A piece of cloth
  • Leather preparer and deglazer
  • Suitable paintbrushes
  • A recommended acrylic finisher
  • A faint paint or sponge brush
  • A shoe cream designed for leather
  • A polish for the leather shoes

Having secured the above, you can apply the paint on your leather shoes following the steps:

  • Using the leather preparer and deglazer, gently brush the surface of your shoes to remove any factory finish. This makes the paint stick on the shoe surface.
  • Assemble the brushes as the shoes dry. The paint has to be thinned with water to make it consistent and able to be applied in thin layers.
  • You can then apply the paint using the faint or sponge brush in thin layers and let the shoe dry before applying another layer. Always follow your reference when applying the paint.
  • On finishing the painting, allow the shoes to dry for about 24 hours in a well-ventilated room or on your porch spot that is shaded.
  • You can then apply the finisher after the 24-hour drying period using a sponge brush or paintbrush. This should be applied in gentle strokes and in one direction, before allowing the shoes another 24-hour drying period.
  • Use the shoe cream to rehydrate the shoes and apply the leather polish. This helps restore the shine and texture of your leather shoes. 

Preventing Sneakers from Cracking After the Painting Process

As you move around in your sneakers after the painting, the paint usually begins to crack the material of the shoe flexes. You can prevent this by doing the following:

  • You need to acquire soft insoles that are thick enough to help minimize the flexing by absorbing your weight.
  • It is not recommended to store your sneakers in a room with low humidity. Therefore, you can keep your shoes in an area with 40% humidity. If they show signs of cracking, you can use a suitable humidifier that is designed to restore back the moisture. 
  • The leather shoes need a high level of maintenance, which requires that you use a conditioner to give a good treatment.

In the following section, we are going to discuss about the shoes you need to own, as well making sure that they are of the right fit on your shoes. 

 


How Many Shoes Should You Own?

How often do you replace your shoes? This is usually a challenging and tricky thing for many people. We may end up wearing sneakers for a long and forget to replace them in time. It is because we can hardly know when our shoes are ready for replacement, and we can go with them for long before we replace them. Once you find a comfortable pair of sneakers, it can be complicated to lay them aside and buy a new pair. However, the shoes used for walking or running need to be replaced as often as possible. In this article, we are going to learn a few things about shoe replacement, especially sneakers.

How Often to Change Shoes

The shoe that we use for running for long distances can only go for about 500 miles. This also applies to the shoes used for walking. The support and cushioning offered by the sneakers we use for walking gets lost when they are used for more than 500 miles. Furthermore, when you are on the heavier side, you will find that your shoes get worn out faster, requiring you to replace them regularly. 

If we walk for about 30 minutes daily for an average of four hours every week, we have to replace our sneakers every six months. However, they can be replaced after every if we walk in them for an average of seven hours a week. This is only possible if we walk in our sneakers for about 60 minutes each day. Therefore, if you have been at a fix on how often to change shoes, they need to be replaced after being used for walking or running for about 500 miles. For this reason, we need to know the number of sneakers we can own to reduce the expenses we undergo in replacing them.

What to Do When Shoes Are Too Wide

What can you do if your shoes are just too big for your feet? This question is common to many of us that cannot the size of your feet. It is hard to know precisely if the pair of shoes you are buying is extra-large for your feet unless you have worn them. The discomfort you feel when wearing the shoes is one pointer that the size is not the right fit for your feet. This is just one way of questioning the size of your shoes, as there are many other ways of identifying this problem. In this article, we share with you other ways and the possible measures to take to fix the problem of your shoe size. To do this, the following steps have been highlighted to guide us through the whole process:

Indications That Your Shoes May Be Too Big

You cannot precisely know that your shoes are too big for your feet by merely looking at them. It requires that you first put them on to know where the problem could be, especially as you walk around or run. In this regard, you may consider many factors that point towards the extra-large size of your shoes. To know that your shoes are too big for your feet, look out for the following signs.

  • The discomfort in your feet. Most of us only associate discomfort in our feet with smaller shoes. This is because the smaller pair of shoes usually make us feel as though our feet are being compressed, especially in the toes and heels. Also, there is a lot of pressure resulting from wearing smaller shoes and spending more extended periods in them. However, putting on too big shoes also generates discomfort. You may have realized that, at times, the shoes tend to slide around as walk or run. The sliding movements may either be from back to front or even sideways. We will try to deal with discomfort by curling our toes to try and hold the sliding shoes in place. In the end, it is common to feel pain in the feet, as well as the back. Furthermore, your toes may develop blisters due to the continuous sliding and the attempts to hold onto the shoes with your toes. This situation may be aggravated by walking on wet grounds as the moisture enter the shoes, making them slide even more.
  • Too long and overlapping laces.  Another indicator of shoes bigger than the size of your feet are overlapping laces. You need to look at the length of the shoelaces when buying a new pair. If you can comfortably tighten the laces until the two ends meet, it means the shoes are too big. This means the shoes will only fit when you tightly lace up the laces and tie their remaining length around your ankles. If this is the case, then you may just have bought another too-big pair of shoes.  
  • When the shoes extra-spacious. While wearing the newly bought pair of shoes, you can know that they are too big by stretching your toes to see if they hit the tip of the shoes. This is what we do every time we are walking or seated. The toes should reach the shoe tip, or the space between them and the end of your shoes should be the size of your thumb’s width. If you realize that the space is too large and you can stretch those toes to no end, then it means you have too big shoes, and you need to take the necessary steps to either resize the shoes or do away with them. 

Now that you have learned how to know if your shoes are too big, it is also worth knowing the action to take after the realization. Depending on how shoes are made, you can do almost anything to make them more comfortable when you wear them. The following section discusses the appropriate steps to take upon realizing that your shoes are too big for your feet.

Do This to Wear Too Big Shoes

The following steps can help you deal with the issue of too big shoes and still wear them with little or no discomfort.

  • Closing the gap. For too big shoes, there is usually this gap between the toes and the tip of the shoes. This is the cause of the sliding movements of the feet in the shoes while walking. To deal with this problem, you can use a tissue by packing it in that space. The tissue helps to hold your toes in place as you walk, reducing the tendency of your feet to slide in the shoes. Furthermore, you can use toilet paper or any thin rag that is soft enough not to scrub against your toes. This packing method will work best for you if you have flat shoes, close-toed heels, or boots. However, if you have athletic shoes, this method is not a good one.
  • Consider using insoles. You can insert insoles inside the too-big shoes to help reduce the sliding movements. These soft pads can increase the softness provided by the shoes, as well as cushioning your feet against any rough surfaces that may cause a painful feeling to your feet while walking or running. Most shoe insoles are made of silicone, gel, or any foam material and are designed to enhance the support of your posture and reduce or eliminate the discomfort of wearing too-big shoes. Moreover, these insoles can really help in shrinking the extra-large pair of shoes. When buying the insoles, consider the type of your shoes. For instance, the silicone insoles are suitable for heels because they comfortably cushion the feet, as well as eliminating the feet that usually builds up in the feet when you spend long hours in the shoes. 

Here are some guidelines for you when you are buying insoles for your too-big shoes:

  • Go for the insole brands that are well-known and trusted by a large number of people. This is one way of ensuring you acquire the insoles that are of the best quality and can last longer. Such brands include Foot Petals or Dr. Scholl's.
  • If there is a possibility of trying out the insoles while still in the store, do it before spending your money on them. This is a good way of ensuring that the insoles you are buying meet your needs, such as comfortability, support for posture, and reducing the size of your too-big shoes.

If you have shoes that are too wide for your feet, you may consider buying insoles to enhance comfort and support for your posture. You can try out any of the following insoles:

Superfeet Green Full-length Insole

These insoles are designed with a heel cup that serves to provide support for the feet and act as shock absorbers while walking or running. They are biomechanically made and are able to fill the extra gap inside your too-big shoes, especially the boots. Moreover, your feet are always kept fresh with a pleasant smell when you use these insoles, which are designed from a foam material. The insoles have an outer covering that is meant to control foul odors, hence maintaining the freshness of your feet all day.

Pros

  • The insoles are high enough and can comfortably fill the excess space in your boots.
  • They are designed to enhance comfort, and they are durable.
  • They enhance sufficient support due to the presence of a heel cup that is deep enough.

Cons

  • They require some time to know how to use them appropriately.

  1. Timberland Pro Men’s Replacement Insole Anti-Fatigue Technology

Similar to the superfeet insoles, the Timberland Pro Men's Replacement Insole Anti-Fatigue Technology is designed to absorb the shock while maintaining the energy in your feet all day. They are made with an anti-microbial cover that ensures your feet stay fresh regardless of the length of time you wear them. Also, the cover serves to regulate the temperature of your feet. These insoles are ideal for taking up the extra space inside your too-big shoes while still providing the needed support for posture. They are made in a way that your feet are always comfortable all day and are perfect for any shape of feet. This is facilitated by the contoured footbed of the insoles, as well as the fit arch that can comfortably adapt to feet shapes.   

Pros

  • These insoles are relatively thick and able to take the space left inside the boots.
  • They have a superior cone design and are made with an inverted foam that is patented.
  • The insoles can be trimmed to fit any size of the boot.
  • All kinds of foot arches can be supported by these insoles.

Cons

  • Many of these insoles are extra-wide and need trimming to fit the sizes of many boots.
  1. Samurai Insoles for Flat Feet Instant-Relief Orthotics

These insoles are perfect in case you have a problem with too big boots. They are designed to provide energy to your feet and support all the necessary places of your feet as you walk all day. 

Pros

  • These insoles are available in different sizes to meet all your needs.
  • They come in two different thicknesses depending on your boot size.
  • When you buy the Samurai insoles, you are given a 60-day guarantee to have your money back in case you are satisfied. 

Cons

  • They come in a red color, which could end up bleeding inside the boots.
  • They might not be that durable.

  1. Sof Sole Insoles Men’s Athlete Performance

These insoles are made thick enough to fill up the extra room in your extra-large boots. The Sof Sole Insoles are designed with gel pads that cushion your heels while walking. Moreover, to ensure that your feet remain fresh, cool, and dry the whole day, these insoles are made with a system that serves to regulate the moisture inside the shoes. Therefore, your feet will always remain fresh and supported by these insoles.

Pros

  • The insoles come with gel inserts meant for the forefoot and the heels.
  • They are designed with anti-bacterial treatment and have wicking characteristics.
  • They are thick enough to allow you to adjust the size of your boot.

Cons

  • When used in some types of boots, these insoles might squeak.

  1. Dr. Scholl’s Pain Relief Orthotics for Heavy Duty Support

With these insoles, you can walk a long distance without the usual discomfort of wearing too-big boots. They are designed to be used by people weighing 200 pounds or more. Dr. Scholl's insoles can be resized to fit any size of a boot and serve to provide support, as well as absorbing the shock while walking in your boots. When you insert these insoles in your extra-large boots, they can make the boots seem smaller, and they are designed with a guard technology that works to prevent fatigue from your feet. Buy these insoles today to make your boots fit your feet and eliminate the discomfort that comes with too-big boots. 

Pros

  • The insoles are designed with enough thickness that makes the boots snug while the toes are free of crowding.
  • They are heavy duty and strong.
  • The insoles can be used by different sizes and shapes of feet. 
  • They can be worn by people weighing 200 pounds and beyond.

Cons

  • You might be required to frequently replace the insoles.
  • They make noises as you walk in them.

  1. Spenco RX Orthotic Arch Support

These insoles are designed with a fabric that is treated with an anti-microbial. Furthermore, they have arch support that is moldable. The insoles are 0.16 inches in thickness each. Therefore, they are good for using to make adjustments to the boots that are too big for your feet.

Pros

  • They provide high foot support because they have an arch insert that is moldable.
  • They are thick enough to make the boots snug around your feet.
  • They are treated with an anti-microbial.

Cons

  • They might squeak when they move inside the boots.
  • The arch support made of plastic may be difficult to mold.

Any of the above-discussed insoles can be used in your too-big shoes to reduce the discomfort, as well as keeping your feet fresh, cool, and dry.

  • Using footpads. At times, using full insoles may not solve the problem of too big shoes for many people. That is why it is recommended to use footpads instead of insoles. They are small enough to be positioned in your foot's ball. When in this position, the footpads serve to provide the needed friction during walking, as well as offering the necessary support. They may not fully reduce the size of too-big shoes but can be a better option for the shoes that are slightly bigger.
  • Heel strips. In case your extra-large shoes keep rubbing against your heels while walking, causing the development of blisters, then it is time you need the heel strips. They work in a similar way to footpads, though they are placed at the back of your heels to help keep the feet in place while walking and reduce the tendency of sliding. Also, heel strips can be placed in other areas, including below your feet or around and enclosing the toes from rubbing against the tip of the shoe. If your shoes are too big and the problem seems to persist regardless of efforts to fix it, then the best solution would be acquiring heel strips today and place them in the exact area where the problem is more serious. 
  • Wear more than one pair of socks. This could be the first step to take towards making your too-big shoes feel smaller and fitting around your feet. You can put more than one pair of socks or use a single but extra-thick pair in your shoes. This helps to take up the extra space inside your shoes and minimize the chances of your heels slipping out of the shoes while walking. To many people, this is the cheapest way of dealing with the problem of too big shoes, as everyone has more than a single pair of socks. You can apply this method when wearing your boots or athletic shoes because these two types of shoes require that you put on socks. However, this solution may not be suitable for other types of shoes, such as the open shoes that do not need to be worn with socks. Furthermore, it may be a problem to put on several pairs of socks on a hot day due to increased sweating. This may lead to your feet having foul odors when you remove the shoes. 
  • Tightening using elastic bands. This method is especially suitable for people with some experience in sewing. If you are one of them, all you need is to stitch some strong elastic bands to the sides and backs of your too-big shoes. In the end, the material of your shoes will be pulled in together from both sides and from the back, resulting in a tighter fit around your feet. A simple process of doing this is by first stretching the elastic bands to tighten and hold them in place using safety pins. The pins can then be removed after sewing the bands to the sides and back of your shoes. When left after sewing, the bands will constrict and, in the process, pull the shoe material and bring about the feeling of tightness around your feet.
  • Shrinking the shoes. This process involves trying to resize your too-big shoes, especially if you do not want to pack various materials inside them. The process is very simple and requires various equipment and your time. Also, you do not want to damage your shoes, which means you have to be careful while performing this simple shoe-shrinking process. To begin with, make sure you know the kind of material you intend to use on your shoes and find out if you may need water in the process. For casual or athletic shoes, you can soak them in water. However, the suede and leather shoes cannot be soaked in water, which means you have to use a spray bottler to wet them. The next step is dying the shoes after having them sufficiently wet, before leaving them out in the sun to dry. Also, in case there is no sun, you can still utilize a hairdryer set to the lowest heating level. The hair dryer should not be held very close to the shoes because it may cause damages to your prized pair. After drying the shoes to satisfaction, you can then wear them and see if they are tight around your feet and repeat the whole process if they fail to fit you properly. You may consider drying the shoes while wearing them as this ensures that they constrict according to the shape of your feet, forming a tighter fit in the process.
  • Ask for professional assistance. All the methods discussed may fail to fix the problem of too big shoes for many people. If you happen to be one of these people, then the best step to take is to ask for assistance from a professional shoe mender or visit a cobbler. Ensure that the service provided by either of the two is affordable and closer to you. This method is good when you are intending to resize your most cherished pair of shoes, as it is not worth it to spend money to repair an old pair.

Reasons Why Your Boots Could Be Too Big

Various reasons explain why your boots may be too big for your feet. In most cases, you may end up buying too large boots because their style is pleasing, forgetting to consider their size in the process. Also, when you purchase the boots from online stores, it becomes impossible to return them when you realize they are not your foot size. Another reason why your boots may be too big, especially that old but favorite pair, is due to the stretching during walking. When the boots are worn for months or years, they stretch and become less fitting around your feet. 

Different weather conditions can also result in the feeling of your boots being bigger than your feet. For instance, the feet of some people may swell in the hot summer, making their boots to feel tighter. When the cold weather comes, the feet will shrink to become smaller, and their boots will feel bigger. This factor is closely related to losing weight, which results in your feet becoming smaller. As a result, your boots will not be that tight and snug around your feet.


  1. This helps fix your too wide shoes

Dealing with the problem of too big shoes can be a real challenge, especially if it is the favorite pair. There are many approaches to fixing this problem, as discussed above. However, when the methods above all fail, you may be forced to use more serious techniques towards fixing your too-big shoes. The following are some of the most appropriate ways of solving this problem in case it becomes persistent.

  1. Shrinking the Shoes

This process may sound quite complicated and almost impossible. However, once you know the basic steps involved, you can actually do it yourself and fix the problem of too big shoes without professional assistance. The method is suitable for canvas, leather, and suede shoes. You will need cool water, a leather conditioner, and a blow dryer in this process. After having the required ingredients, you can shrink your shoes using the following steps:

  • Identify the exact area of the shoe that needs shrinking, such as the sides or the front. This step is only applicable when you want to shrink a part of the shoe. If it is the entire shoe that needs shrinking, then start with the following step. 
  • If you want to work on a section of the shoe, wet that area with cool water using your finger or a piece of cloth. For the entire shoe, use a spray bottle for wetting and not immersing the shoe in the water.
  • Set the blow dryer to a medium setting and apply heat on the wet shoe or the identified section. The blow dryer should be held about 6 inches from the region to be shrunk until it is completely dry. 
  • If you are working on suede or leather shoes, the dryer should be continuously moved around the shoe’s top edge. This way, the leather or suede shoe heats faster and becomes easy to be shrunk. 
  • After sufficiently drying the shoes, put them on to see if their size has been reduced to fit around your feet.
  • For suede and leather shoes, apply a suitable conditioner onto a piece of cloth and gently rub it on the surface of the shoes. This ensures that the shoe material regains its moisture. You can read the manufacturer’s directives to confirm how long the conditioner should stay on the shoe surface. 

The process above is enough to enable you to shrink your too-big shoes to your desired size. The following simple tips can be of help in case you want to shrink your shoes with ease:

  • Consider working on different sections of your shoes while shrinking them, rather than working on the whole shoe at once. For instance, you can start with the front area of the shoe because it can easily be shrunk.
  • Do not put the insoles in the water or wet them in any way. This is because the insoles can easily develop a foul odor, cracks, or even discolor.
  • In case you are working on canvas shoes, do not bring the blow dryer too close to the shoe surface. This is because the canvas fabric can easily be discolored when exposed to direct heat.
  • In case you are shrinking leather shoes, take note of any changes in the smell or any signs of the leather cracking. If this happens, turn off the blow dryer immediately.
  • When the results are not satisfying after the process, keep repeating the procedure until you note differences in the size of your shoes.
  • The shoes may shrink to an extent the fit is extremely tight around your feet, causing pressure to build up. If this happens, you can wear a pair of socks thick enough inside the shoes to stretch the shoe material. 
  1. Constricting the Shoes.

This method can be used when you have some skills in sewing. It involves stitching elastic bands inside the too-big shoes, especially in the areas of the heels. On constricting, the elastic bands will pull the opposite sides of the shoe towards each other, making the shoe to have a tighter fit around your feet. This process only requires you to have a sewing needle, the elastic bands, one for each shoe to be constricted, and a thread. the following steps are used in this shoe constricting process:

  • Stretch each elastic band tightly inside each shoe to be constricted in the heel's regions.
  • Hold the stretched bands and use safety pins to secure them in place.
  • While the bans are tightly stretched, sew them in this position and remove the safety pins. 
  • After sewing the elastic bands, release them. The two sides of each shoe will be pulled together, giving the shoes tighter fits around your feet when you wear them. 

You now know the exact steps to take to deal with the problem of too big shoes. Many other measures can be employed to counter this problem, though the ones I have shared are the most common. Also, they are guaranteed to give you positive outcomes if carried out properly. You can carry out one method more than once to note the desired difference.

This Is What Happens When You Wear Too Big Shoes

The following are the possible complications associated with wearing too-big shoes. When you fully understand these effects, you cannot wear those larger shoes before working on them or having them replaced:

  1. Your stride could be altered by wearing too-big shoes. When your heel slips out of the shoe repeatedly, you could start walking in an unnatural or dysfunctional way. Moreover, as you continually contract your toes to deal with this problem, you may develop foot complications such as hammertoes or bunions.
  2. Too big shoes continually rub against your heels, resulting in the development of blisters.
  3. The constant pressure that builds up in the toes when they are curled to hold the too-big shoes in place may result in a certain callus known as foot corn.
  4. The foot's ball may experience inflammation and pain, a condition known as metatarsalgia. This ailment is made worse by wearing too big shoes that do not provide sufficient support when walking. If not treated in time, this condition may lead to Morton's toe syndrome.
  5. Due to the insufficient support as a result of wearing too-big shoes, you can easily fall. As you climb up or down the stairs, your feet will keep sliding inside the shoes, increasing the probability of falling.
  6. The performance of runners is greatly reduced when they wear too-big shoes. The lack of support causes more pressure to build up in the runner's calf muscles, reducing the forward propulsive force that is necessary for peak performance.
  7. Wearing too big shoes is also a cause of the development of many foot-related complications, including arch pains, neuromas, and Achilles tendonitis. These conditions may spread to the rest of the body, such as the back, neck, and knees.

The Frequently Asked Shoes

Is acrylic paint waterproof? This paint is water-resistant but not water-proof. This means you have to be very cautious and avoid wearing your acrylic coated shoes on any rainy day. 

Is acrylic paint permanent? It all depends on the quality of the paint being used and the type of the shoe surface. The paint is easily absorbed by a number of materials. Acrylic is near-permanent on materials like canvas and paper but is likely to peel off on surfaces made of leather, metal, plastic, and glass. High-quality acrylic paint is likely to last longer, though it eventually faded due to continuous exposure to dirt and sunlight.

Closing Thoughts

It is hoped that this article has been quite educative with regards to the suitable paint you can apply to your shoes. A lot of paints can be used on different types of shoes, including your most cherished sneakers. Following the steps discussed in this article, you can give your shoes the care and look they deserve by applying the acrylic paint. This paint is recommended by many artists around the world because of its quality. However, there are ways of applying it on your shoes that make it last longer without cracking. Depending on the number of shoes you have, you can buy this paint today and keep your shoes in good condition today. Always ensure to apply the paint in thin layers and allow your shoes to dry for about 24 hours before you can wear them.


Leave a comment

Please note, comments must be approved before they are published