DIY SHOE REPAIR – HOW TO REATTACH A LOOSE SOLE

DIY SHOE REPAIR – HOW TO REATTACH A LOOSE SOLE

DIY SHOE REPAIR – HOW TO REATTACH A LOOSE SOLE

Everybody wears shoes, and there are a lot of cobblers who repair the damaged shoes. There is no such shoe that does not need to repair. One day every shoe becomes idle, and if you repair it, you can wear it for some time more.


Why Shoes the Sole of Shoe Separate From the Leather?

There are many reasons due to which the sole of the shoe becomes loose. When you go to walk, you kicked something on the road or park. It may be hard or strong. This can make your sole loose. When you are going anywhere, and you face rain or some water through which you have to cross by foot, this water also makes sole loose because it finishes the sticking power of glue. Sometimes school-going children also face this problem with their shoes. When they run in the playground, their toes pull the shoes onwards. This makes the sole loose.


How to Avoid The Shoes From Detaching The Sole?

Every sneaker has not such a strong sole than it cannot separate from the leather. Most of the sneakers are just made for walking softly, and they are wearing on special events like birthday parties. You can also wear such sneaker while going to the office. You should buy sports shoes that are made up of leather because they are very strong and most people wear such shoes for a morning walk and running.

You can buy these strong shoes from Freaky Shoes.


How to Repair The Loose Sole at Home?

When you find that your shoe has been damaged or its sole has become loose, you try to find a shoe repair shop near me. Today, we will tell you a complete method in which you will learn how to reattach a loose sole. This method will help you to repair your shoes at home without going to a shoe repair shop. You can save your money by repairing your shoes at home.

You need all the following materials to repair your DIY shoes of which sole has become loose.

 

  1. The glue - which will be used to attach the sole with leather. Shoe Goo is the best glue

    from all others. It is a little expensive and difficult to find. You can buy it from the shoe

    repair nearby shops. A wood skewer or other such thing used to spread glue over the sole fairly.

     

  2. A clamp made up of steel or iron that will be used to hold the leather with sole after applying glue.

     

  3. A pair of rubber bands that will use with clamp for holding.

     

Follow the given steps carefully to reattach the loose sole of your shoes.

 

  1. Take the bottle or tube of Shoe Goo glue that you bought from a shoe repair shop.

    Open its tap and use a pin to take the glue out from the tube. You can use the

    backside of tap as a pin.

     

  2. Now, pick your shoes and make their sole separate from the leather so that you

    can apply glue easily. If you do not do this, your sole will not reattach perfectly.

    Keep in mind that only separate that part of sole from leather that is not attached.

    It means you have not to separate the whole sole from the leather. The part of

    shoes from where the sole is often separate from leather is from the shoes.

    It is after the centre of the shoe.

     

  3. After this, keep the glue tube in hand and use one hand to pick the leather up

    so that it could not come down suddenly because now you have to apply glue.

     

  4. Now, take some glue out according to the area of damage and pour it there.

    You can use your foot to hold the shoe with earth so that it could not shake.

     

  5. When you have poured the glue on the damaging area of the sole of the shoes,

    use the wood skewer or something else to spread whole the glue on the

    required area. It may be the handle of a small steel spoon.

     

  6. If you see that the glue that you have spread is not enough, you can pour some more.

     

  7. Keep in mind that whenever you take out glue from the bottle or tube, close it soon

    with its tap because it may be dry.

     

  8. If you use it carefully and avoid it from drying, you can use it for up to 6 years.

    It is expensive, so use it carefully.

     

  9. When you have spread glue on the sole, keep the leather on the sole to

    attach them both.

     

  10. Press the leather and sole together to make their contact strong.

     

  11. Now, use the clamp of iron or steel to catch and hold the shoe for a long time.

     

  12. After this, use a pair of rubber bands and put them on the front of the shoes

    where you have applied glue. Make sure the rubber band should be first

    from the clamp towards the center of shoes.

     

  13. Keep your shoes at a place where nobody can reach.

     

  14. Wait for 24 hours to dry the glue. When the glue dries, your shoe sole will be

    reattached strongly with the leather of the shoe.

     

  15. You will see that there is some glue around the sides of the shoes,

    make it clean with a cloth.

     

  16. If this glue has become sold due to dry, use a knife and scratch it

    carefully because it may damage the shoe design.

     

Now, your shoe is reattached strongly, and you can wear it. Simply follow these steps again for the other shoe. You should not go to a cobbler for repair. You can search for the methods of shoe repair online. The method that you learned is quite perfect. We can say it proudly that if you repair your shoe like this, your shoe will remain last until your foot becomes longer than the shoe.


Whenever you want to buy your shoes, visit Freaky Shoes. It is the best online shoe selling store.

 

 

 


Leave a comment

Please note, comments must be approved before they are published

Tags